+86 13696864883
Item No.:
FA-TJ-01Product origin:
Fujian,ChinaColor:
As your demandShipping port:
Jiangyin PortLead Time:
15DAYSBrand:
FOEN
GM2 T joint
|
Material |
AL 6005-T5/SUS304 |
|
Surface Treatment |
Average Anodizing Coating Thickness≥ 12μm Average |
|
Panel Type
|
Framed & Frameless |
|
Wind Load |
≤60m/s |
|
Snow Load |
1.4KN/m2 |
|
Panel Orientation |
Landscape/Portrait |
|
Tilt Angle |
0°~60° |
|
Seismic Load |
Lateral seismic factor: Kp=1; seismic coefficient: Z=1; Use coefficient: I=1 |
|
Standards |
JIS C 8955 : 2017 AS/NZS 1170 DIN1055 ASCE/SEI 7-05 International Building Code: IBC 2009 |
|
Warranty |
15years quality warranty, 25years life span warranty |
Highly pre-assembled before shipment, save your onsite labor cost.
Can be well used on ground, flat roof and pitched roof.
Check and test Structure strictly for the use in extreme weather and geographical conditions.
15 years' warranty, 25 years' life span.
A free consultation
Adjustable Metal Roof Standing Seam Clamp 03 is especially deigned for metal roof solar mount system, fixed on the roof seam to fix rails.
Adjustable Metal Roof Standing Seam Clamp 03 is especially deigned for metal roof solar mount system, fixed on the roof seam to fix rails.
Ground screws are for ground-mounted solar power systems without any block making onsite.
Aluminum adjustable end clamp kit can be adjusted from 35mm-50mm, it can be used in most of panels you don't know the thickness. Also, we can spray the aluminum to any color you want.
Adjustable Metal Roof Standing Seam Clamp is especially deigned for metal roof solar mount system, fixed on the rooftop to install rails.
Adjustable Metal Roof Standing Seam Clamp is especially deigned for metal roof solar mount system, fixed on the rooftop to install rails.
online service
+86 13696864883
sales@foenalu.com
English
русский
español
português
Nederlands
日本語
Türkçe
Polski
ไทย
Tiếng việt
Indonesia
